MERRY CHRISTMAS - XMAS15 ON STERLING AND AMPS

XMAS15 - Happy New Year!
Contact us!
0
Back to top
0
1 2

BB12170 - 12V to 12V 170A Battery to Battery Charger w/ reverse charging feature (Jump Start Assistance)

PRODUCT RANGE :

£1,078.80
Tax included. Shipping calculated at checkout.
Product Code

SKU: BB12170

12V to 12V DC to DC Chargers 170A models - E-Marking | BB12170

5 Years Warranty - From 1st November 2024

A detuned BB12200. The BB12170 may be perfect for those that deem the 200A model to be slightly too powerful. This shall require 170A of alternator power to run.

Available now

We can ship to the USA

Remote control BBR - Optional remote

- Buck Boost design, offering high efficiency (95-98%)
- Simple installation and setup
- Current limiting 4 stage battery charger
- Lithium safe
- 12V to 12V
- BB12170 - 2100W continuous output charging power
- Up to 170A input current and up to 150A output current at 14.8V

- 96% efficient

Jump start assistance feature - please click here to read about

 Watch video about the Jump Start feature

Smart Alternator/Euro 6 compatible
- Ignition feed or Vibration Sense modes
- 6 preset battery types
- 6 self recovering protections
- Low temperature trip for Lithium Ion batteries

BB12170 Reverse Charging Feature. Jump start assistance feature

The BB12170 is able to charge in both directions. Provided there is over 13.2V on the leisure battery (13.5V if lithium) and the starter battery is below 13V the BB shall allow approximately 60A to flow back to the starter battery up to about 13.4V (float voltage). It simply allows the starter battery to remain topped up when there is surplus energy in the domestic battery. This feature will NOT drain your domestic battery - it simply takes surplus. Once your alternator / engine turns on or you provide the BB with an ignition signal the BB reverts to normal charging of the leisure battery.  This mode can be disabled, but is on as default.

This is ideal for allowing the starter battery to remain topped up when you have solar / wind / charger - charging up your leisure battery.

Generic Instructions:

Instructions / Information pack BB12200


 Battery to Battery Charger Remote Control - BBR

(Optional)

BBR comes with 4m extension cable

What does the BBR offer?
- Live voltage and current readings from BB output
- Ability to set custom charge profiles | absorption, float and absorption time length
- Ability to adjust current limit to 85%, 65% or full power (100%)
- Allows the removal of float voltage feature in lithium profiles
- Desulphation / equilisation settings can be set in LEAD modes.

Why adjust the current limit?

The default current setting for the BB range is 100% - meaning that the performance default is full power. If you wish to reduce the performance of the BB, here you can set to 85% or 65% charge rate. Examples of why you may wish to reduce performance:
1) if you have solar panels and the weather is good, by reducing the power of the BB, you shall conserve fuel.
2) The alternator is better suited running at slightly lower current than what was expected.
3) It may be recommended by your battery supplier to charge the battery up at a slightly lower current. If one of your lithium batteries within your leisure battery bank fails, you may be exceeding the C rating of the remaining batteries.
4) future proofing. If you have installed a high powered BB, in the assumption that one day you shall put a larger alternator on and/or more batteries in your system. You can reduce the power for the immediate install and increase the performance of the unit at a later date.

 Instructions


BB12170

Input voltage range:  9V-16V
Input current rating: 170A
reverse current rating: 60A at 13.4V(max)


Continuous Rated output power: ~2100W - Realistic maximum continuous output power - 14.8V at 150A.

Continuous Rated input power:   ~2300W
Quiescent current:            15mA
Efficiency rating:            95-98%


Self recovering protections:    under voltage protection
                input over voltage protection
                output over voltage protection
                over current protection
                charge over temperature

Operational Temperature        -20 Deg C -> 60 DegC

Approval             CE | UKCA
                E-Marking 24*10R06/01*3789*00
Cooling method            Thermostatically Controlled
                Variable low speed fan

Dimensions            309mm x 130mm x 96mm
Weight                2.2Kg


 E-Marking Certificate